Metallic Epoxy Flooring in San Antonio, TX

Metallic epoxy flooring is our most artistic San Antonio service. A metallic epoxy floor starts with clear or tinted epoxy mixed with fine metallic pigment. While the crew spreads and works the resin, that pigment moves and comes to rest in swirls, veins and pools of color that catch light like polished stone or moving water. Every floor ends up one of a kind. It suits people who want a showpiece: a game room, a home bar, a converted garage, a studio, a salon or a small retail space.

Indoors yes, full sun no

Metallic floors belong indoors. Standard epoxy yellows and dulls in sunlight, and HomeGuide gives epoxy just a poor-to-fair UV score. San Antonio's strong sun makes that a real concern, so we do not recommend metallic for uncovered patios or garages left open through the afternoon. In a garage that stays mostly closed, it can work with a UV-stable clear coat, but you should know the tradeoff up front. Inside the house, where the floor is out of direct sun, metallic holds its look well.

Slab first, art second

A metallic floor is glossy and smooth, so it shows every flaw under it. Cracks, pits, trowel marks and patches can all telegraph through. The slab is ground, cracks and low spots are filled, and often apply a primer and a base coat before the metallic layer goes on. For interior floors, moisture testing matters even more than in a garage. Many San Antonio homes sit on slabs poured directly on soil, and a slab that pushes moisture up can cause bubbles or a cloudy spot in a clear coating. When readings run high, a moisture-tolerant primer goes in the system and its cost goes in the quote.

Get a Free Estimate

Choosing colors and a look

Metallic pigments come in silvers, pewter, copper, bronze, gold, deep blue, charcoal, pearl white and many custom blends. A floor can be one color that varies in depth or two or three colors worked together. Some owners want a calm, marble-like look. Others want strong movement and contrast. Light plays a big part: a room with large windows shows more shimmer, while a darker room makes the pattern look deeper. We bring sample boards and talk through how the room is lit before you choose.

Removing old flooring

Many metallic projects start under carpet, tile or laminate. When that comes up, the slab often carries tack strips, thinset, mastic or adhesive that has to be ground off. Older homes in the central neighborhoods may have layers from several renovations. We look at what is on the floor during the estimate. If removal is part of the job, the quote says so. Expect some dust during grinding; we use vacuum-connected grinders to keep it down.

Care and wear

A metallic floor is hard and easy to clean, but fine scratches stand out on its gloss in a way they do not on flake. Felt pads on chair and table legs, a door mat at each entry and a dust mop pushed around often keep it looking good. For rooms with heavy traffic or pets, we can add a tougher clear topcoat and a satin finish that hides fine scratches better than high gloss. Spills wipe up without staining. Avoid dragging heavy furniture and keep grit off the floor as much as you can.

Cost of a metallic epoxy floor

Installed metallic epoxy runs $5 to $12 per square foot according to This Old House, and notes that high-grade coatings can add 20% to 30%. Removing old flooring, repairing the slab, moisture-tolerant primers and multi-color designs all push a floor toward the higher end. Because each metallic floor is custom, we only quote after we have seen the room, tested the slab and talked about the look you want. The number on that written estimate is the price.

Rooms where metallic floors make sense

Metallic floors suit game rooms, media rooms, home offices, finished garages used as living space, bars and kitchens with a concrete slab, salons, studios, boutiques and small offices. They are less suited to rooms that take heavy grit from outside or to floors where tools and equipment get dragged. In a converted garage, think about whether the space will ever go back to parking. If it might, a flake or polyaspartic system is the safer choice. We are glad to talk through both at the estimate.

Planning the schedule

A metallic room is out of use for several days. Removal and grinding come first, then repairs, primer, a base coat, the metallic layer and a clear coat, each with its own cure time. Air temperature and humidity affect how the pigment moves and how fast each coat sets, so we keep the air conditioning running in the room and steady during the work. We give you a day-by-day plan before we start, so you know when furniture comes out and when it can go back.